Home | About Us | Product | Inquiry | Contact Us
 
 
QUALI-SL

TECHNICAL LITRETURE
 
QUALI-SL is a powerful one-bath scouring & Dyeing agent polyester and blends. It is suitable for both continues and batch process systeme of pretreatments. QUALI-SL is non-hazardous, non-toxic, low foaming agent stable to both mild acids and alkalies. It efficiently removes natural impunities, oils and waxes from the fabric's so as to make them absorbent. It also help in getting uniform treatment to the yearns, fabrics etc. It also improves penetration of dyes to the fabrics so It is helpful for saving time, water & coasting with level dyeing effect.
 
TECHNICAL INFORMATION
 
APPEARANCE Translucent, light, bluer liquid
CHEMICAL COMPOSITION Sulphated Ethoxiylated compound with activator
IONIC NATURE Non-ionic, Anionic blend
PH (10% Solution) 7-0
SOLUBILITY Soluble in cold water
COMPATIBILITY Compatible with non-ionic, anionic chemical
APPLICATION

Give a HCL wash of Gray Goods at 70 to 80 C for 10 Min. and drain the bath, set for Dyeing as follows:

FOR 100% POLYESTER FOR POLYESTER / VISCOS OR POLYESTER/ COTTON
QUALI-SL - 3 gm. Per liter or 0.75% QUALI-SL -3 gm. Per liter or 0.75%
PH-PH is maintained -5 PH with Acid or Oxalic Acid. Add Procian Dye & run 50 to 60 for 10 Min. add
Temp-Raisetemp up to 130 C Common salt, Kg. And raise Temp 80 C run 10 Min. and add
Gradually and hold for 30 Min. Disperse dye and rais Temp up to 130 gradually. Hold 30
Cool & Drain Hot Wash Cold Min. Cool at 90 C and add soda ash-1½ to 3 kg. In the same
Wash & take out. bath run 10 Min. and Drain the bath Neutralize and Dye fix & take out.
 
HANDLING
 
We do not foresee any ill on health, provided the product is used for the purpose. It is intended and due attention is paid to the precaution and protective measures necessary when chemicals are handled
 
THIS INFORMATION IS FOR GUDANCE ONLY
 
Home | About Us | Product | Inquiry | Contact Us
Copyright (c) 2003, Hytech Surat. All Right Reserved Check Your E - Mail
eXTReMe Tracker
spacer
spacer spacer